Leather for sheath, veg tanned 200 x 250 mm
- 1.00 (cm)
- 20.00 (cm)
- 25.00 (cm)
- Gift wrapping:
- Options available
- Calculated at Checkout
Vegetable Tanned Leather for Sheath, 20 x 25 cm
Vegetable tanned shoulder leather, approx 3 mm thick.
These pieces are cut into 20 x 25 cm (minimum) size and will be enough for one or maybe 2 small sheaths.
This leather is normal tooling leather ( not half-tanned) and will stay softer and more pliable.
The leather should be sealed and can be dyed and tooled with great results.
The sheath can be made by folding the leather around the finished knife, and using contact cement to glue it up.
Then punch holes with an awl (or drill holes) and sow the sheath together before cutting off the excess leather and dying it.
The belt loop is either attached from a separate strip, or made as part of the sheath and folded back behind the sheath and sown on.
This example is using half-tanned leather but the process is the same: