Stainless Damascus Paring Knife Kit, Made in Japan

(1 review) Write a Review
Width:
3.00 (cm)
Height:
5.00 (cm)
Depth:
31.00 (cm)
Gift wrapping:
Options available
Shipping:
Calculated at Checkout
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
  • Stainless Damascus Paring Knife Kit, Made in Japan
$101.41

Description

Stainless Damascus Paring Knife Kit

 High quality Stainless Damascus paring knife, made in Japan. The blade finish is hand hammered, consisting of 33 layers of damascus or forge welded stainless steels, creating a unique look.

This is one of the quickest kits to complete we offer, requiring little tools and time.

 The kit consists of

  • Damascus Paring blade, 95 mm blade
  • Stainless Steel bolsters with pins
  • Handle Scales in Black Regal Wood
  • Handle Scale Rivets

The Stainless Steel Damascus Paring Knife model is a high quality 33-layer hammered stainless damascus kitchen paring knife that is designed for stand-alone use, or as an addition to our matching set. This knife, properly built, will yield one of the best looking kitchen paring knives on the market today, a definite rival for custom knife quality design.

The blade is about 2 mm thick, about 25 mm wide and with a 95 mm long blade, total length is 197 mm.
The outer layers on this model are made from SUS-410 and SUS-430 stainless steel over an AUS-8 stainless steel core. The finish is hand-hammered, creating a stunning high-end look and finish. This combination makes for an incredibly durable, heirloom quality kitchen piece. The blade is Made in Japan. 

The handle scales are in "regal wood", laminated for strength and dyed jet black for a classic, clean look.

This kit comes with all stainless components; featuring dual front bolsters, matching assembly pins, handle rivets and a beautiful designer gift box. 

To complete this kit:

  • insert pins through bolsters, peen with hammer
  • Add pre-shaped handle scales
  • Hammer down handle rivets
  • Optional: finish with tung oil or similar

Full instructions with photos are on the "Instructions" tab

 General Kit Specifications

Kitchen Classic Series - 33 Layer Hammered Damascus Paring Knife 
Blade Steel: Stainless Damascus - SUS-410, SUS-430 over AUS8 stainless steel core.
Finish - Hammered
Bolster/Pin: 416 Stainless Steel
(Heat Treated/Cryo-Treated for Optimum Blade Performance)
Damascus Finish: Etched
Blade Length: 3.75 inches
Overall Length: 7.75 inches
Blade Width: 1 inch
Thickness: .080”

 

http://creativeman.com.au/knife-kits/

View AllClose

1 Review

  • 4
    damascus paring blade....with red 'wood' handle

    Posted by S John Edwards on 31st Jul 2018

    Nice steel. Handle product was not of same quality. Would be nice to have really good quality product ( WOOD ??!!) options for the handle.

View AllClose