60 kg Blacksmith Anvil, Cast Steel (PICKUP Sydney Only)
- 55.00 (cm)
- 24.00 (cm)
- 23.00 (cm)
- Gift wrapping:
- Options available
- Calculated at Checkout
60 KG Cast Steel Blacksmith Anvil (Pickup only from Brookvale, NSW 2100)
Cast steel anvil in 1050 carbon steel, good for knife makers wanting to forge their own blades.
These are Creative Man branded anvils in the old traditional "London Style", popular with knife makers due to round horn and big, flat face.
The anvil face is ground flatand the rest of the anvil is coated in black for corrosion resistance.
At a weight of 60 kg these are suitable for most general knife making and blacksmithing jobs including hammers and axes.
A cost effective way into blacksmithing:
- Hardened to 56-59 HRC on the face
- Face is 34 x 9.5 cm plus cutting step
- Round Horn
- Square hardy hole 22 x 22 mm
- Round pritchel hole 15 mm
- Anvil foot is 23 x 23 cm
These are cast and hardened and are flat and hard, but will need to be dressed for best results.
Dressing the anvil is done by rounding the edges using a flap wheel on an angle grinder, or hand files. And the round horn ground nice and even to remove cast marks and the black paint. This dressing makes the anvil more useful, as forging with the sharp corners tend to pinch the steel and create cracks.
These are cast from 1050 steel with Carbon content 0,54%, Silicone 0.255%, Manganese 0.775%, Sulfur 0.016% and Phosphorous 0.012%. Hardness test was average 57.3 HRC done in July 2020 on this batch of 45 kg and 60 kg anvils.
Note these can only be picked up from Northern Beaches in Sydney at a pre-arranged time.
We are unable to ship these at this time.
** Nowra knives make sturdy custom anvil stands for these (and any other anvil model). Contact Troy H for a quote on https://www.facebook.com/NowraKnives/