Brisa Bobtail Kit with Handle Materials, Scandi Grind

Brisa Bobtail Knife Making Kit with Handle Materials, Stainless 12c27, Scandi Grind

The ""Bobtail" is one of the newest blades from Finnish brand Brisa, somewhat longer than the Necker.

The kit includes blade and handle materials:

• Brisa Bobtail blade in 12C27, Scandi Grind
• Curly Birch handle scales
• Brass corby bolt for the front hole
• Brass lanyard tube for the rear hole

The blade is about 3.2 mm thick, about 25 mm wide and has about 80 mm of blade, total length 170 mm. The holes in the handle is 1/4" at the rear for optional lanyard tube and 4.6 mm at the front for 1/4" corby bolt or use handle pins in 1/8".

The blade is in Swedish 12c27 Stainless Steel with satin finish, combining with the EnZo build quality and attention to fit and finish, into a high-quality knife. The blade has the traditional Scandi Grind popular with bushcrafters for ease of sharpening and good control while whittling and carving. The short, sharp blade gives good control in a small package.

 The knife is from Finnish company Brisa. This is not the simplest kit we have, requiring fitting both the corby bolt and lanyard tube to small tolerances.

CreativeMan.com.au