Corby bolt drill w/counter sink 5/16"
- Width:
- 10.00 (cm)
- Height:
- 3.00 (cm)
- Depth:
- 1.00 (cm)
- Gift wrapping:
- Options available
- Shipping:
- Calculated at Checkout
Description
Corby Countersink with pilot drill bit, for 5/16" Corby Bolts, Loveless bolts etc
Set for installing corby bolts of size 1/4"
Comes with pilot drill 4.6 mm, and the "countersink" the short stubby drill bit special made for the shoulder of the Corby bolt at 5/16".
Related Products
Corby Bolt, Brass (20 bolts)
$40.00
Corby Bolt, Brass (1/4", 6.5 mm) Set of 20 bolts Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks...
$40.00
Drill bit set for 1/4" Corby Bolts
$17.00
Drill bit set for 1/4" Corby Bolts Drill bit set for installing corby bolts of size 1/4" Consists of one each of HSS (steel) drill bits in 4.6 mm and 6.4 mm for corby bolts. The 4.6 mm is used in...
$17.00
1/4" Corby Bolt Starter Pack w/10 Corby Bolts
$29.00
1/4" Corby Bolt Starter Pack
This starter pack is everything you need to start using Corby Bolts;
10 x Corby Bolts, 1/4" in brass or stainless steel (See options)
1 x 4.6 mm drill...
$29.00
Corby Bolt, Brass (4 bolts)
$9.00
Corby Bolt, Brass (1/4", 6.5 mm) Set of 4 bolts Medium size corby bolt in brass, for securing handle scales to full-tang knife blades. These are often used in addition to epoxy glue, for both looks...
$9.00
