Corby Bolts, Stainless Steel (4 bolts)
- Gift wrapping:
- Options available
- Calculated at Checkout
4 x Corby Bolts, Stainless Steel (1/4", 6.5 mm)
Medium size corby bolt in steel, for securing handle scales to full-tang knife blades.
These are often used in addition to epoxy glue, for both looks and additional attachment strength of the handle scales.
The bolt has thicker end pieces (6.5 mm / 1/4") with screwdriver slots in them, total length is 28 mm.
The centre section is 4.69 mm thick and is the part that goes through the blade.
The bolt is threaded, consisting of two pieces that when tighetend is ground down to sit flush with the handle scales.
This is for a set of 4 bolts.
Example of brass corby bolts in Danish made Raffir "Grand Chef" blade, knife by Åge Fjeldberg:
Exceptional service from creative man and the quality of the Corby Bolts gets 10 out of 10.
Bjorn, it's always a pleasure to do business with you. Everything is always extremely well packed and delivered quickly.
I ordered the wrong bolts for the knife I purchased but these look great for the right project.
Excellent product, exactly as described and as pictured.
Before use make sure that you have the correct drill and countersink bits.
Good quality product delivered at an affordable price.
Cant fault the bolts themselves and the overall experience was great.
Have already made a second purchase of other items now that i have tested this out.
Good site/shop Bjorn!
A good product from a very good supplier.
Creative man thanks for your great site.