EnZo Trapper Blade, Scandi Grind, Carbon Steel

(No reviews yet) Write a Review
Width:
4.00 (cm)
Height:
1.00 (cm)
Depth:
21.00 (cm)
Gift wrapping:
Options available
Shipping:
Calculated at Checkout
  • EnZo Trapper Blade, Scandi Grind, Carbon Steel
  • Shown in optional EnZo Trapper Kit (this item is the blade only)
  • Showing example of a finished Trapper knife, with curly birch scales, brass corby bolts and leather sheath. Note this item is only the blade
  • EnZo Trapper Blade, Scandi Grind, Carbon Steel
  • Shown in optional EnZo Trapper Kit (this item is the blade only)
  • Showing example of a finished Trapper knife, with curly birch scales, brass corby bolts and leather sheath. Note this item is only the blade
$54.82

Description

EnZo Trapper 95 Blade,  Carbon Steel (Scandi Grind)

This is the Carbon Steel version of the high-quality Trapper blade, with the popular Scandi Grind.

The "Trapper" blade from EnZo is a very sharp, Finish blade with great edge geometry for cutting.

The blade is about 3.6 mm thick, about 25 mm wide and has about 95 mm of blade.

The blade is in 01 Carbon Tool Steel, popular with outdoors-men due to good edge retention qualities.

Holes are 2 x 4,1mm, 2 x 4,65mm, 1 x 6,4mm, 4 x 3,1mm, medium corby bolts are a good fit. Unlike the Stainless Steel version, this blade does not have holes for adding separate bolsters. These blades requires a single scale on each side, glued and then screwed down with corby bolts.

 

Example of EnZo Trapper completed where the handle scales are sealed with oil:

enzo-2031.jpg

 

View AllClose

Related Products