EnZo Trapper Knife Kit 115, Flat Grind, ELMAX steel

EnZo Trapper Knife Kit with Sheath and Handle Scales  (ELMAX version)

This is one of the most complete knife kits we sell, the blade is in ELMAX super stainless steel.

This kit consists of 

• High quality EnZo Trapper 115 blade, flat grind
  
• Handle Scales, already shaped in 3D (see options)
• Red spacer material that goes between the blade and handle scales
• Brass corby bolts

Options: Select what material you want to complete the handle scales in.

The "Trapper" blade from EnZo is a very sharp, Finish blade with great edge geometry for cutting.

The blade is about 3.6 mm thick, about 26 mm wide and has about 115 mm of blade. Total length 225 mm.

The blade is in ELMAX "super" stainless steel (link to review of ELMAX on BladeOps.com)

The handle scales shown are in Desert Iron Wood. (See options for other wood types).

This wood is the first choice for scandi knives, due to high level of figure in the wood, while still providing a solid and durable grain structure that can easily be worked.

This high-quality kit is 80% completed. 

Work required is to glue on the scales to the blade using Epoxy glue. In some kits the red spacer material is already glued to the scales, and in some kits this come as a loose item. If it comes loose in your kit, drill holes for the bolts and glue the spacer material to the handle scales. When the glue is dry, the spacer material can be cut to fit the handle scales using a sharp knife or file.

Securely screw down the Corby bolts, then file or grind off the bolt heads sticking above the handle scales.

Then sand the scales and finish them with oil, dye, wax or similar to seal them for improved durability. 

The leather sheath is ready to use, in thick, exclusive oxe hide.