Instructions

How to make your own blade and fulltang knife   These instructions show how to make a knife including the blade itself, using the Gameco 1084/1075 Carbon Steel kits. Thank you to Corin and the team at Gameco for the images and help. The...

Instructions: Uncle Bjorn’s Handle Finish Neutral Finish. Resin Based Hard Wearing Handle Finish The kit consists of Bottle 1: the resin mix itself Bottle 2: lubricant oil Cotton fabric to apply the resin mix Sand paper We recommend...

Instructions: Completing a Scandi Knife Kit  ** If wanting these instructions printed and posted rather than reading them here, include them with your order. You will then also be sent a link for downloading them as a PDF file when your order...

Increase grain contrast by staining the wood   Some handle pieces are special because of the way they look, others because there is something special about the piece and how you got it. Staining the wood and sanding some off again, can be a good...

Instructions: Completing a Folding Knife Kit  for the folder kits that come with loose sides (liners) and blade, pin stock is used to combine these into a folder. For instance the Gentleman's Folder kit or the Folder Kit 65 mm.   List...

Instructions for Laguiole French Folding Knife Kit Tools used: Ball Peen Hammer Small Phillips screwdriver Bench vice Files and/or dremel Sandpaper Laguiole French Folder kit https://creativeman.com...

How to: Completing a Fulltang knife   These instructions are for Fulltang blades, where handle scales are attached on each side of the blade. For stick tang instructions, see this link: https://creativeman.com...

Instructions for Hardening and Tempering 12C27 Steel 12c27 is a popular Stainless Steel, made by Sandvik in Sweden. There are several hardening profiles suggested by Sandvik, the below is one of these, providing good hardening with a temperature...

  Pouch style leather knife sheath This guide is for completing the Pouch Style Sheath Kit in US vegetable tanned leather ,but can be completed in most any leather by using the below images as a guide to cutting out the pieces required...

 Instructions for completing the Stainless Steel Damascus Knife Kits   These instructions use the SS Damascus Paring Knife kit, the instructions are the same for all kits in this series. Tools required: File Sand paper Hammer Something...

Quick overview of the steps involved in making a "scandi knife sheath":   Required equipment Needles and thread Half-tanned leather Awl There is a better tutorial coming, please excuse the mobile quality images for now. Steps: Wrap...